NC951 Disabled Persons Toilet Alarm
Roll-over image to zoom
The NC951 Standard Disabled Persons Toilet Alarm Kit comprises:
An NC942B Call Controller c/w onboard 12V PSU, a volume adjustable buzzer, a zonal alarm LED (to provide audible and visual indication of a call), a mute/reset button (for silencing or cancelling calls) and a volt-free relay with normally open, closed and common contacts rated at 30Vd.c. @ 1A. It also includes a 500mA battery back up facility that will continue to power the system for up to 24 hours standby and 15 minutes (alarm running time) in the event of mains failure. The controller’s label also includes Braille text for the benefit of visually impaired members of staff.
An NC809DBB Remote Reset Point c/w Sounder. Designed for use alongside the WC, the NC809DBB allows calls generated by the ceiling pull to be cancelled at source, i.e. inside the WC. It also features an on-board reassurance LED and sounder (to provide audible and visual indication of an alarm call inside the WC and to help reassure users that help is on its way). Like the call controller, the reset point’s label includes Braille text for ease of use by the visually impaired.
An NC807C Ceiling Pull incorporating a red confidence indicator (to reassure the user that a call has been made), a 3m cord and two red triangular pull bangles, specially designed for ease of use by the infirm. Note, for applications requiring more than one point of call (for example at the WC and the wash basin), up to three ceiling pulls can be daisychained together.
An NC806CS Overdoor Light c/w Sounder. Used to provide additional audible and visual indication of an alarm call outside the WC, the NC806CS features a series of ultra-bright LEDs in a triangular shaped diffuser making it highly visible from a distance. Usually located directly outside the WC above the door.
An NC949 Disabled WC Sticker, gloss finished in permanent vinyl featuring the universally recognisable Disabled WC symbol.
An NC942B Call Controller c/w onboard 12V PSU, a volume adjustable buzzer, a zonal alarm LED (to provide audible and visual indication of a call), a mute/reset button (for silencing or cancelling calls) and a volt-free relay with normally open, closed and common contacts rated at 30Vd.c. @ 1A. It also includes a 500mA battery back up facility that will continue to power the system for up to 24 hours standby and 15 minutes (alarm running time) in the event of mains failure. The controller’s label also includes Braille text for the benefit of visually impaired members of staff.
An NC809DBB Remote Reset Point c/w Sounder. Designed for use alongside the WC, the NC809DBB allows calls generated by the ceiling pull to be cancelled at source, i.e. inside the WC. It also features an on-board reassurance LED and sounder (to provide audible and visual indication of an alarm call inside the WC and to help reassure users that help is on its way). Like the call controller, the reset point’s label includes Braille text for ease of use by the visually impaired.
An NC807C Ceiling Pull incorporating a red confidence indicator (to reassure the user that a call has been made), a 3m cord and two red triangular pull bangles, specially designed for ease of use by the infirm. Note, for applications requiring more than one point of call (for example at the WC and the wash basin), up to three ceiling pulls can be daisychained together.
An NC806CS Overdoor Light c/w Sounder. Used to provide additional audible and visual indication of an alarm call outside the WC, the NC806CS features a series of ultra-bright LEDs in a triangular shaped diffuser making it highly visible from a distance. Usually located directly outside the WC above the door.
An NC949 Disabled WC Sticker, gloss finished in permanent vinyl featuring the universally recognisable Disabled WC symbol.
NC942B One Zone Call Controller with battery backup facility
Mains supply: Voltage: 230V a.c.;
Max current: 23mA;
Frequency: 50Hz.
Output: Voltage: 12V d.c.;
Current: 140mA; Volt-free relay contacts (NO/C/NC).
Indicators: Red alarm present LED; Green supply present LED (flashes green when battery back up is active in the event of mains failure).
Controls: ‘RESET’ Button (link selectable for reset, mute or no function).
IP Rating: IP41 when correctly installed.
Dimensions: 147 x 87 x 39mm (WxHxD). Mounts on 25mm UK double gang back box.
NC807C Ceiling Pull
Input: Voltage:12V d.c.;
Connections: Signal and -Ve.
Pull cord: Generates an alarm call when activated.
Indicators: Red reassurance LED active in alarm.
IP Rating: IP41 when correctly installed.
Dimensions: 93mm diameter x 27mm deep. Surface mountable.
NC806CS Overdoor light c/w sounder
Input: Voltage:12V d.c.;
Connections: Signal, -Ve and +Ve.
Indicators: Dual ultra-bright red LEDs active in alarm.
Sounder: Active in alarm.
IP Rating: IP41 when correctly installed.
Dimensions: 87 x 87 x 68mm (WxHxD). Mounts on 25mm UK single gang back box.
NC809DBB Reset point c/w sounder
Input: Voltage:12V d.c.;
Connections: Signal, -Ve and +Ve. Indicators: Red reassurance LED active in alarm.
Sounder: Active in alarm.
IP Rating: IP41 when correctly installed.
Dimensions: 87 x 87 x 24mm (WxHxD). Mounts on 25mm UK single gang back box.
Mains supply: Voltage: 230V a.c.;
Max current: 23mA;
Frequency: 50Hz.
Output: Voltage: 12V d.c.;
Current: 140mA; Volt-free relay contacts (NO/C/NC).
Indicators: Red alarm present LED; Green supply present LED (flashes green when battery back up is active in the event of mains failure).
Controls: ‘RESET’ Button (link selectable for reset, mute or no function).
IP Rating: IP41 when correctly installed.
Dimensions: 147 x 87 x 39mm (WxHxD). Mounts on 25mm UK double gang back box.
NC807C Ceiling Pull
Input: Voltage:12V d.c.;
Connections: Signal and -Ve.
Pull cord: Generates an alarm call when activated.
Indicators: Red reassurance LED active in alarm.
IP Rating: IP41 when correctly installed.
Dimensions: 93mm diameter x 27mm deep. Surface mountable.
NC806CS Overdoor light c/w sounder
Input: Voltage:12V d.c.;
Connections: Signal, -Ve and +Ve.
Indicators: Dual ultra-bright red LEDs active in alarm.
Sounder: Active in alarm.
IP Rating: IP41 when correctly installed.
Dimensions: 87 x 87 x 68mm (WxHxD). Mounts on 25mm UK single gang back box.
NC809DBB Reset point c/w sounder
Input: Voltage:12V d.c.;
Connections: Signal, -Ve and +Ve. Indicators: Red reassurance LED active in alarm.
Sounder: Active in alarm.
IP Rating: IP41 when correctly installed.
Dimensions: 87 x 87 x 24mm (WxHxD). Mounts on 25mm UK single gang back box.
Please visit the 'downloads' section for sales literature & instruction downloads.